Audi Q7 Bolt Pattern

Catalog records for the Audi Q7 use two bolt patterns: 5×130 for 2007–2015 and 5×112 for 2017–2023.

Yes. Catalog records show two bolt patterns: 5×130 (2007–2015); 5×112 (2017–2023). Choose the pattern that matches the vehicle you have.

Generation, year range, and configuration can change the hub. Catalog records for the Audi Q7 list 5×130 for 2007–2015 and 5×112 for 2017–2023. Do not assume later years match earlier years.

Catalog records show 5×130 for 2007–2015 (9 years).

Catalog records show 5×112 for 2017–2023 (7 years).

Catalog records show 5 lugs on 5×130 (2007–2015); 5 lugs on 5×112 (2017–2023).

5×130 means 5 lug positions on a 130 mm pitch circle. The first number is lug count; the second is the pitch circle diameter in millimetres.

5×112 means 5 lug positions on a 112 mm pitch circle. The first number is lug count; the second is the pitch circle diameter in millimetres.

Catalog records show 71.5 mm for the 5×130 variant and 66.5 mm for the 5×112 variant.

Catalog records show M14 x 1.5.

Catalog records for the Audi Q7 list lug bolts with M14 x 1.5 thread.

Yes. 5×112 and 5×4.41 describe the same bolt circle: 5 lugs on 112 mm (4.41 in). Use either notation when comparing wheels.

Only with a bolt-on wheel adapter from the vehicle pattern (5×130 or the other recorded pattern) to the wheel pattern. Adapters are directional. Confirm thickness, center bore, thread, stud engagement, clearance, and load rating. Hub swaps and redrilling are not equivalent shortcuts.

You need a directed adapter whose source pattern is 5×130 and whose target pattern matches the wheels. 5×130 to another circle is not the same as the reverse unless the catalog lists both directions. Pick the target on this page; thickness is not chosen automatically.

Spacers must match the vehicle bolt pattern (5×130 or 5×112). Choose thickness for clearance and offset. Matching the pattern is not a claim that a given spacer fits the vehicle.

Only when the wheel center bore is larger than the vehicle hub. Catalog records show 71.5 mm for the 5×130 variant and 66.5 mm for the 5×112 variant. Rings fill that gap. They do not fix every vibration issue and they do not change bolt pattern.

The ring is wheel center bore (outer) to vehicle hub (inner). Enter the bore stamped on the wheel. Catalog matches are exact outer and inner millimetres, not nearby sizes.

No. A hub ring only fills a wheel bore that is larger than the hub. A smaller wheel bore cannot be opened with a ring.

Match the recorded thread. Catalog records show M14 x 1.5. Fastener type: lug bolts. Seat style and length are not in this catalog — confirm those on the wheel before ordering.

Thread must match, but aftermarket wheels often need a different seat style or length. Matching thread is not enough by itself. Catalog records show M14 x 1.5.