Chrysler Grand Voyager Bolt Pattern

Catalog records for the Chrysler Grand Voyager use a 5×114.3 bolt pattern.

Catalog records show 5×114.3 for 2000 (1 year).

Catalog records show 5 lugs (5×114.3).

5×114.3 means 5 lug positions on a 114.3 mm pitch circle. The first number is lug count; the second is the pitch circle diameter in millimetres.

Catalog records show 71.5 mm.

Catalog records show M12 x 1.5.

Catalog records for the Chrysler Grand Voyager list lug nuts with M12 x 1.5 thread.

Yes. 5×114.3 and 5×4.5 describe the same bolt circle: 5 lugs on 114.3 mm (4.5 in). Use either notation when comparing wheels.

Only with a bolt-on wheel adapter from the vehicle pattern (5×114.3) to the wheel pattern. Adapters are directional. Confirm thickness, center bore, thread, stud engagement, clearance, and load rating. Hub swaps and redrilling are not equivalent shortcuts.

You need a directed adapter whose source pattern is 5×114.3 and whose target pattern matches the wheels. 5×114.3 to another circle is not the same as the reverse unless the catalog lists both directions. Pick the target on this page; thickness is not chosen automatically.

Spacers must match the vehicle bolt pattern (5×114.3). Choose thickness for clearance and offset. Matching the pattern is not a claim that a given spacer fits the vehicle.

Only when the wheel center bore is larger than the vehicle hub. Catalog records show 71.5 mm. Rings fill that gap. They do not fix every vibration issue and they do not change bolt pattern.

The ring is wheel center bore (outer) to vehicle hub (inner). Enter the bore stamped on the wheel. Catalog matches are exact outer and inner millimetres, not nearby sizes.

No. A hub ring only fills a wheel bore that is larger than the hub. A smaller wheel bore cannot be opened with a ring.

Match the recorded thread. Catalog records show M12 x 1.5. Fastener type: lug nuts. Seat style and length are not in this catalog — confirm those on the wheel before ordering.

Thread must match, but aftermarket wheels often need a different seat style or length. Matching thread is not enough by itself. Catalog records show M12 x 1.5.

For odd lug counts such as 5, measure from the center of one hole to the far edge of a hole across the hub, then convert with a bolt-pattern gauge. 5×114.3 means 5 lugs on a 114.3 mm circle.

Check the owner’s manual, a tire/wheel placard, or measure the hub. This page lists catalog records for the Chrysler Grand Voyager; it does not invent a stamp location on the vehicle.